My Cart
0
Item
Currency
|
BRANDS 
ENGINEERING SERVICES 
CONTACT US 
ABOUT US 
5kw Midi Heater Front Outlet 4x 50mm 12v
As low as
£210.00
£175.00
T7Design 5kw Midi Heater with 4x ∅ 51mm Front Outlets with Valve 12v
The 5kw Midi Heater is our new mid-sized offering, this size of heater is perfectly suited to medium sized vehicles, commercial & agricultural vehicle cabins and marine applications. The heater comes complete with a 3 speed centrifugal blower and a built in ON/OFF water valve.
All of the Midi Heater components are manufactured within the UK & Europe, we have used high quality components which ensure longevity and safe operation.
Typical weight savings over a production vehicle heating system can be in excess of 6kg.
| Specification | Metric | Imperial & Other |
| Heat Output | 5 kw | 17,060 BTU |
| Airflow | 399 m3/hr | 235 cfm |
| Weight | 2.8 kg | 6.16 lbs |
| Hose Size | ∅ 16mm | ∅ 5/8" |
| Air Nozzle Size | 4x ∅ 51mm | 4x ∅ 2" |
| Noise Level | 62 dB (Max Fan Speed) | - |
| Voltage | 12v | |
| Current Continuous | 10.5a | |
| Fan Speeds | 3 Speed with Onboard Resistor Pack | |
| Water Valve | Yes - Push to Close | |
| Enclosure Construction | Aluminium Enclosure with Black Anodised Finish | |
| Heater Core Design | Aluminium Tube & Fin | |
| Manufacturer | T7Design Ltd | |
| Part Number | 94E-ED0-B9C | |
Wiring Information
The heater has an integrated resistor pack offering 3 speed control; OFF 1 2 & 3. No switch is supplied with the kit, please view our range of multi position switches in our store.
| Wire Colour | Use |
| Red Wire | High Speed |
| Orange Wire | Medium Speed |
| Yellow Wire | Low Speed |
| Black Wire | Earth |
Please ensure your supply is fused appropriately, it is recommended to use a 12 to 15a fuse and that your cable is rated higher than the fuse.
Dimensions
ATTENTION
- Please note that a corrosion inhibitor such as glycol or anti-freeze should be used to prevent corrosion and prolong the useful life of all components used in the vehicles cooling system.
- The water valve is not a bypass design, when in the OFF position no water will flow back to the engine, therefore this heater is unsuitable for use on a vehicle which also uses the heater circuit as the engines thermostat bypass circuit. If your engine has no seperate thermostat bypass circuit then please look at our other version of this heater without water valve and also our bypass type water valves.
- Please make sure that no foreign matter can be ingested into the fan, this is the quickest way to destroy blower motors and could potentially cause a fire. For example, this is particular important if the heater unit is installed onto or close to the floor of the vehicle. If you intend to mount this outside of the interior compartment then it would be recommended to install a filtered cover to protect the blower and ensure long operation life.
Check items to add to the cart or
