T7Design Silicone Hose Blanking Cap - 22mm ID, 3Ply - Black
Our highly flexible silicone hoses are manufactured to the highest standard and are perfect for many applications including radiator pipes and air/intake pipes within modern engines. Depending on the diameter required, the hoses come with 3-5 ply of polyester fabric with a minimum wall thickness of 4.0mm. The hoses are available from 6mm to 152mm inside diameter sizes and all meet the requirements of SAE J20R1 Class A. Working Temperature -50°C to +180°C. Material Specification Silicone Compound
Tested to BS903 at pressed cured for 5 minutes at +115°C. Hardness (IHRD) 65 + 5, Density (g/cm3) 1.26 + 0.03, Tensile strength (Mpa) 7 min, Elongation at break (%) 200 min, Tear strength (KN/m) 11 min, Compression set (%) 18 Max.
Imperial & Other
Hose Wall Thickness
SAE J20R1 A
Country of Manufacture
Silicone Material Specification
Tested to BS903 at pressed and cured for 5 minutes at 115Â°C.
65 + 5
1.26 + 0.03
Tensile strength (Mpa)
Elongation at break (%)
Tear strength (KN/m)
Compression set (%)
Please double check that you are ordering the correct diameter for your application prior to checkout.