12mm Hose OD R 3/8

12mm Hose OD R 3/8" BSP Elbow Male To Push Fit Hose Fitting

4mm Hose OD R 1/4

4mm Hose OD R 1/4" BSP Banjo Push Fit Hose Fitting

12mm Hose OD R 1/2" BSP Elbow Male To Push Fit Hose Fitting

£3.36 £2.80
Availability: In stock
P/N
JPL12-04
Logo
Logo
Logo
Logo
Logo

Male Threaded Push Fit Hose Elbow Fittings - Black

Our range of Male Threaded Push Fit Elbow Fittings are made from high quality Nickel-Plated Brass & Polyoxymethylene (POM). These Elbow Fittings are ideally suited for adapting a component to accept push fit hose.

We hold a large range of push fit hose joiners, push fit hose threaded fittings and Polyurethane (PU) push fit hose in stock which are suitable for many applications in the Automotive, Engineering and Commercial industry.

Please note that it is only recommended to use these products with air or pure water (pure water must not exceed 60°C). In pure water applications, if the temperature of the fluid exceeds 60°C, the heat and moisture can cause damage to the fitting's body and gasket.

Although it is not recommended, these products can be used with other fluids but must not be corrosive or flammable. Please note, using aggressive fluids will reduce the working life of the hose or fitting.

FEATURES & BENEFITS

  • All push fit hose joiners and fittings utilise a Black, quick release, easy to use locking collar which secures the push fit hose inside of each joiner or fitting.
  • All push fit hose joiners are made from high quality, durable Polyoxymethylene (POM).
  • All threaded fittings feature a durable Nickel-plated Copper body to withstand corrosion and contamination to air and pure water applications.
  • All BSP (R) tapered fittings include sealant tape pre-installed to the threads.
  • All BSPP (G) parallel fittings include a pre-installed O-Ring seal.
  • All Metric fittings are not supplied with any sealing equipment and require the use of PTFE/Teflon tape when being installed.
  • After installation, the direction of each push fit hose fitting can be easily swivelled without removal.

Specification Metric Imperial & Other
Recommended Working Pressure 0 - 9 Bar 0 - 130.5 Psi
Maximum Pressure* 9.0 - 13.2 Bar 130.5 - 191.5 Psi
Working Temperature 0 to 60 °C 0 to 140 °F
Fluid Compatibility Pure Water, or non-aggressive fluids.
Material - Hose Polyurethane (PU)
Material - Joiners Polyoxymethylene (POM)
Material - Threaded Fittings Nickel-Plated Brass & Polyoxymethylene (POM)

*It is not recommended to run within the maximum pressure limits for prolonged periods of time as this can severely deteriorate the hose and fittings life span.

Thread Guide

Thread Code Thread Name Thread Angle Thread Seal
M Metric Parallel PTFE/Teflon Thread Seal Tape
BSP (R) British Standard Pipe Tapered Thread Seal Tape
BSPP (G) British Standard Pipe Parallel O-Ring
NPT National (American) Pipe Thread Tapered Thread Seal Tape

Recommended Torque Values (For Threaded Push Fit Fittings)

Thread Type Thread Size Torque Metric N-m Torque Imperial lbs-ft
Metric M3 x 0.5 0.7 N·m 0.52 lbs-ft
Metric M5 x 0.8 1 - 1.5 N·m 0.74 - 1.1 lbs-ft
Metric M6 x 1.0 1.8 - 2.3 N·m 1.3 - 1.7 lbs-ft
BSP & BSPP 1/2" 7 - 9 N·m 5.2 - 6.6 lbs-ft
BSP & BSPP 1/4" 12 - 14 N·m 8.9 - 10.3 lbs-ft
BSP & BSPP 3/8" 22 - 24 N·m 16.3 - 17.7 lbs-ft
BSP & BSPP 1/2" 28 - 30 N·m 20.7 - 22.1 lbs-ft
NPT 1/6-28 7 - 9 N·m 5.2 - 6.6 lbs-ft
NPT 1/8-27 7 - 9 N·m 5.2 - 6.6 lbs-ft
NPT 1/4-18 12 - 14 N·m 8.9 - 10.3 lbs-ft
NPT 3/8-18 22 - 24 N·m 16.3 - 17.7 lbs-ft
NPT 1/2-14 28 - 30 N·m 20.7 - 22.1 lbs-ft
Installation & Removal Precautions (Threaded & Push Fit)

Installing and removing both threaded and push fit hose fittings.
Please use a suitable tool to fasten and remove the fittings through the outer hexagon or inner hexagon of the fitting body. When tightening the fittings threads, please refer to the recommended torque amount listed in the recommended torque values information above. If the torque amount exceeds the recommended value, it can cause stress to the threads and may cause the fitting to break, or the gasket to deform and cause the fitting to leak.

Cutting, preparing and installing your Polyurethane hose.
When cutting your Polyurethane hose, please ensure that the cut surface of the hose is completely vertical to avoid the pipe forming an oval shape. We recommend that you purchase and utilise our own Polyurethane Push Fit Hose Cutter Tool (P/N: PU-HOSE-CUTTER). It is also recommended that once you have inserted your pipe to your fitting or joiner, please pull the pipe to confirm that it is completely secured into the locking ring.

Removing push fit hose from any threaded fittings and joiners.
When removing push fit hose, please make sure that the internal pressure is zero. Please press the release ring evenly before removing the push fit hose. If the release ring is not completely compressed, you can strain the hose and tube debris could remain inside of the fitting.


attention
ATTENTION
  • The air or fluid pressure must not exceed 13.2 Bar / 191.5 Psi.
  • It is not recommended to use these fittings for pure water applications that exceed 60°C, the heat and moisture can cause damage to the fitting's body and gasket.
  • Please double check you are ordering the correct size and quantity prior to checkout.
More Information
Inlet Port Type Male Threaded
Outlet Port Type Push Fit
Outlet Hose Size 12mm
Fitting Type Elbow
Thread Type BSP (R)
Colour Black
Body Material POM - Polyoxymethylene
Manufacturer T7Design

Shipping Information & Charges

VAT is included on the UK prices below, no VAT is applicable on ROW prices.

European Customers: We offer a next working day delivery service to most European countries, please get in touch for pricing.

ROW Customers: If you would like a more accurate shipping quote or a faster service via DHL please get in touch with your requirements.


United Kingdom & Northern Ireland

Mainland
Service GBP 0 - 50 (inc VAT) GBP 50+ (inc VAT)
RM Second Class 3.60 N/A
RM First Class 4.20 N/A
DPD / DHL Next Working Day 9.00 9.00
DPD Next Working Day by 12am 16.50 16.50
DPD Saturday All Day 15.00 15.00
DPD Saturday by 12am 39.50 39.50
DPD Sunday All Day 19.50 19.50


Scottish Highlands & Islands, Channel Isles, Scilly Isles, Isle Of Man, Isle of Wight
Service GBP 0 - 50 (inc VAT) GBP 50+ (inc VAT)
RM First Class 4.20 N/A
DPD / DHL Two Day 17.30 17.30


Europe

DHL Tracked Delivery. Approx 2 - 7 days depending on distance from the UK.

Country Cost in GBP
AUT - Austria 30.00
BEL - Belgium 25.00
BIH - Bosnia and Herzegovina 50.00
BGR - Bulgaria 45.00
HRV - Croatia 35.00
CZE - Czech Republic 35.00
CHE - Switzerland 42.00
DNK - Denmark 30.00
EST - Estonia 35.00
FIN - Finland 35.00
FRA - France 35.00
DEU - Germany 28.00
GIB - Gibraltar 46.00
GRC - Greece 40.00
HUN - Hungary 35.00
IRL - Ireland 25.00
ISL - Iceland 50.00
ITA - Italy 32.00
LVA - Latvia 46.00
LTU - Lithuania 45.00
LUX - Luxembourg 26.00
NLD - Netherlands 26.00
NOR - Norway 45.00
POL - Poland 35.00
PRT - Portugal 35.00
ROU - Romania 45.00
SRB - Serbia 45.00
SVN - Slovenia 35.00
SVK - Slovakia 35.00
ESP - Spain 30.00
SWE - Sweden 35.00


Rest Of World

Below are the most popular countries we ship to world-wide. If your country is not listed please get in touch for a quote.

DHL Express: We offer shipping via DHL, please get in touch for pricing and more information on their Worldwide 1-2 day services.

Country Cost in GBP
CAN - Canada 60.00
JAM - Jamaica 50.00
JPN - Japan 70.00
MLT - Malta 58.00
MYS - Malaysia 50.00
NZL - New Zealand 52.00
RUS - Russia 50.00
ZAF - South Africa 49.00
THA - Thailand 55.00
USA - United States of America 70.00
SGP - Singapore 90.00

 


By Order Value: GBP 0 - 50 GBP 50 - 120 GBP 120+
AUS - Australia 40.00 60.00 80.00