T7Design Inline Fan / Blower 76mm (3") Fume Extractor

Large Inline Extraction Blower 76mm (3") 12v

Our large inline extraction blower is designed specifically for drag racing and drift applications to quickly extract smoke or fumed laden interior air and replace it with fresh air for the driver, this will help aid visibility and improve driver health. For drag racing applications the unit can be run just after a burn out to remove interior smoke. For drift applications the blower can draw in air from the very front of the car to pressurise the interior volume helping to prevent tyre smoke from entering via door shuts and other slight openings.

Designed by T7Design and assembled in house, our new 76mm Inline Blower has been designed for maximum performance and manufactured to the highest quality. It utilises a high-performance brushless fan that flows a seriously impressive 200cfm and is designed to operate for 50,000 hours. For example traditional brushed fans have a life expectancy of only 2000 - 5000 hours! Not only do our blowers flow a huge volume but they do so whilst consuming far less current than brushed fans at only 2amps resulting in minimal extra load on your electrical system. This truly is a fit and forget product that will not let you down when it is needed the most. The enclosure utilises a laser cut alloy mounting bracket with rugged spun alloy cones each end of the fan.

The fan is single speed only and can be operated from many simple ON/OFF switches as long as they can handle at least 5a of current. The fan draw is 2a continuous, 3a upon start-up.

We also carry a wide range of automotive wiring products such as relays, fuses, terminals, cable, switches & more.

ATTENTION

• Please double check that you are ordering the correct voltage blower for your application prior to checkout.