VA09-AP50C-27A

Spal Radiator Fan - 11.0" (280mm) Pull VA09-AP50/C-27A 932cfm

Spal Radiator Fan - 13.0

Spal Radiator Fan - 13.0" (330mm) Push VA13-AP51/C-35S 1186cfm

Spal Radiator Fan - 12" (305mm) Pull VA10-AP70LL-61A 1328cfm

£178.26 £148.55
Availability: In stock
P/N
VA10-AP70LL-61A
World Wide Shipping
Same Day Dispatch
Fast Shipping
Contact Us
Logo

VA10-AP70/LL-61A - SPAL Electric Radiator Fan - 12.0" (305mm) PULL

SPAL Automotive is a well renowned designer & manufacturer of high quality automotive electric radiator fans, founded in 1959 they have since become the supplier of choice for many high volume & specialist automotive manufacturers throughout the world. SPAL Automotive have extensive design, testing and manufacturing facilities that allow them to produce consistent high quality products that can withstand the most demanding conditions.

SPAL Axial Fan Motors are IP68 rated, this protection offers the highest stability, durability and lifelong performance for motors used in extreme working conditions. All IP68 certified SPAL motors are Water Proof which means they are completely sealed and therefore protected against ingress of solid and liquid agents.

SpecificationMetricImperial & Other
Airflow Max2250 m3/hr1328 cfm
Weight2.35 kg5.17 lbs
Blade Diameter∅ 305mm∅ 12.0"
Housing Diameter∅ 335mm∅ 13.19"
Depth∅ 87.6mm∅ 3.45"
Voltage12v
Current Continuous13.2 - 14.2a
Power Consumption158.4 - 170.4w
Fan TypePull
Motor TypeHigh Performance, Long Life (Typically 10,000 hrs MTBF)
ProtectionIP68 Certified
Warranty36 Months
ManufacturerSPAL Automotive
CertificationsUNI EN ISO 9001:2008, ISO TS 16949, ISO 14001
Part NumberVA10-AP70/LL-61A
Fan Mounting

SPAL fans can be mounted in various ways, the fans have bolt holes & slide-in mounting flanges around the circumference of the housing. The most popular method is by using the Bracket & Strap mount, the straps are made from powder-coated steel and are approximately 200mm long, for most applications the are long enough to reach mounting flanges on the top, bottom or sides of the radiator. Other mounting brackets are available in lengths of 20, 30 and 60mm.

Due to the weight of this fan it is advised against installation using a through-core fan mounting kit.

Wiring Information

As standard, the SPAL fan is supplied with a 2 Pin Female connector only, please see below for the correct part numbers for the male connector and recommended terminals.

Wire ColourUseRecommended Wire Size
1x Red+12v2.5mm² (10 SWG)
1x BlackEarth / Ground2.5mm² (10 SWG)
Plug TypePN ConnectorPN TerminalsManufacturer
Female (supplied)180908-042098-2AMP
Male (not supplied)180907-05-160446-5 (1 - 2.5mm²)AMP

We also carry a wide range of automotive wiring products such as relays, fuses, terminals, cable, switches & more.

Dimensions
VA10-AP70LL-61A Dimensioned Drawing
Q & A

Q: Should I buy a SPAL fan?

A: SPAL have been around since 1959 and are the go-to manufacturer for OEM's and the aftermarket for ultra-reliable and high performance fans and blowers, their products are built to last. When a manufacturer offers a 36-Month warranty on their products then you know it's good quality. Buy it once, buy SPAL.

Q: What fan size should I chose?

A: Go for the biggest fan you can fit, if you have a slim and long radiator then it may be best to run twin fans, especially in warmer climates.

Q: Standard, Standard Plus, High Performance & Brushless Motors?

A: Most SPAL fans are available with Standard, Standard Plus and High Performance motors that operate at a higher RPM and flow proportionately greater amounts of air, a higher electrical consumption and greater noise level are the trade-offs. Even though the blade and housing depth doesn't change for the more powerful motors, they are thicker and more room is required to install the fan.

Brushless Motored fans offer variable fan speed via PWM signal, they offer the highest waterproof rating (IP6K9K) and the longest service life of 30,000 hrs MTBF. Usually only very specialist applications warrant these features.

Q: Which motor type should I chose?

A: The standard fans are fine for most applications, this is the type that we run on most of our projects here at the shop. For cars that are running extra thick radiators with air conditioning, turbo intercoolers or transmission coolers it is recommended to move up to a more powerful motor over the standard type. Remember that rad fans also help keep engine bay temps in check.

Q: How do I control the fan?

A: We recommend wiring them up to be activated using a temperature sender in your vehicles cooling system, a toggle switch is not recommended as you may forget to turn it on at the proper time - plus this is one less thing to worry about!

Q: Can the fans run in reverse?

A: Technically yes, you will not damage the motor running the fan in reverse, however the blades are optimised to run in one direction only and you will be sacrificing efficiency and airflow by not running the fan the correct rotation. The brushless fans cannot be run in reverse, you will damage the motor by reversing the polarity.

Q: Push or Pull?

A: Push fans sit in front of the radiator and push air through the core, Pull fans sit behind the radiator (usually the engine side) and draw air through the core.

SPAL Push or Pull
attention
ATTENTION
  • Prior to purchase please double check that you are ordering the correct voltage and air flow direction for your application.
  • No mounting brackets are included, please see our shop or store for our full range of fan mounting options.
More Information
Blade Diameter 305mm (12")
Fan Direction Pull
Fan Depth (mm & inches) 87.6mm (3.45")
Performance High Performance
Voltage 12v DC
Manufacturer Spal Automotive

Shipping Information & Charges

VAT is included on the UK prices below, no VAT is applicable on ROW prices.

European Customers: We offer a next working day delivery service to most European countries, please get in touch for pricing.

ROW Customers: If you would like a more accurate shipping quote or a faster service via DHL please get in touch with your requirements.


United Kingdom & Northern Ireland

Mainland
Service GBP 0 - 50 (inc VAT) GBP 50+ (inc VAT)
RM Second Class 3.60 N/A
RM First Class 4.20 N/A
DPD / DHL Next Working Day 9.00 9.00
DPD Next Working Day by 12am 16.50 16.50
DPD Saturday All Day 15.00 15.00
DPD Saturday by 12am 39.50 39.50
DPD Sunday All Day 19.50 19.50


Scottish Highlands & Islands, Channel Isles, Scilly Isles, Isle Of Man, Isle of Wight
Service GBP 0 - 50 (inc VAT) GBP 50+ (inc VAT)
RM First Class 4.20 N/A
DPD / DHL Two Day 17.30 17.30


Europe

DHL Tracked Delivery. Approx 2 - 7 days depending on distance from the UK.

Country Cost in GBP
AUT - Austria 30.00
BEL - Belgium 25.00
BIH - Bosnia and Herzegovina 50.00
BGR - Bulgaria 45.00
HRV - Croatia 35.00
CZE - Czech Republic 35.00
CHE - Switzerland 42.00
DNK - Denmark 30.00
EST - Estonia 35.00
FIN - Finland 35.00
FRA - France 35.00
DEU - Germany 28.00
GIB - Gibraltar 46.00
GRC - Greece 40.00
HUN - Hungary 35.00
IRL - Ireland 25.00
ISL - Iceland 50.00
ITA - Italy 32.00
LVA - Latvia 46.00
LTU - Lithuania 45.00
LUX - Luxembourg 26.00
NLD - Netherlands 26.00
NOR - Norway 45.00
POL - Poland 35.00
PRT - Portugal 35.00
ROU - Romania 45.00
SRB - Serbia 45.00
SVN - Slovenia 35.00
SVK - Slovakia 35.00
ESP - Spain 30.00
SWE - Sweden 35.00


Rest Of World

Below are the most popular countries we ship to world-wide. If your country is not listed please get in touch for a quote.

DHL Express: We offer shipping via DHL, please get in touch for pricing and more information on their Worldwide 1-2 day services.

Country Cost in GBP
CAN - Canada 60.00
JAM - Jamaica 50.00
JPN - Japan 70.00
MLT - Malta 58.00
MYS - Malaysia 50.00
NZL - New Zealand 52.00
RUS - Russia 50.00
ZAF - South Africa 49.00
THA - Thailand 55.00
USA - United States of America 70.00
SGP - Singapore 90.00

 


By Order Value: GBP 0 - 50 GBP 50 - 120 GBP 120+
AUS - Australia 40.00 60.00 80.00