Our Stainless Steel Radiator Fan mounting kit has been designed to overcome the shortfalls of the plastic through radiator mounting kits, these kits use Stainless Steel hardware and Nitrile Rubber washers which are impervious to all weathers and all fluids commonly used in automotive applications. This kit is also re-useable should you need to reposition your fan, replace it or are swapping out the radiator.
These kits use our specially designed washers to specifically fit our range of SPAL Radiator Fans, however as most other fans on the market are direct copies of SPAL products then these kits could fit other non-branded fans.
Quantity | Item |
4x | M5 Stainless Steel Cap Head Bolts (Chose length above) |
4x | Stainless Steel Laser Cut Washers |
8x | Nitrile Rubber Sticky Backed Washers |
4x | Stainless Steel Penny Washers |
4x | Stainless Steel M5 Nyloc Nuts |
Please use the table below to determine the bolt size required.
Bolt Length | Radiator Core Thickness |
M5 x 50mm | 18 - 33mm (0.71 - 1.30") |
M5 x 60mm | 28 - 43mm (1.10 - 1.70") |
M5 x 70mm | 38 - 53mm (1.50 - 2.08") |
M5 x 80mm | 48 - 63mm (1.89 - 2.48") |
Please install the kit as seen in the diagram below: