FREE NEXT DAY DELIVERY*

* UK MAINLAND ONLY - ON ORDERS OVER £100

Same Day Dispatch - Order Up To 3:30pm

Davies Craig Electric Water Pump Mounting Bracket 8700 Front

Davies Craig EWP Rubber Mounting Bracket EWP115, EWP130 & EWP150

GM LS Series Header Adapter Kit - 8670 Front View

GM LS Series Header Adapter Kit

Davies Craig Digital EWP / Fan Controller 12 & 24v

£176.16 £146.80
The unique LCD EWP / Fan Digital Controller will manage the operation of your chosen EWP by varying the speed of your pump in response to coolant temperature and manage control of your Electric Radiator Fan, no need for a separate thermal switch.
Availability: In stock
P/N
8002
brand
Davies Craig
Logo
Logo
Logo
Logo
Logo

Davies Craig EWP & Fan Controller Kit 12v & 24v

The LCD EWP / Fan Digital Controller has two specific functions. This unique Digital Controller will manage the operation of the EWP by varying the speed of the pump in response to the coolant temperature and manage control of your electric engine fan.

The Controller has a push-button to lock in any temperature from 40°C (104°F) to 110°C (230°F). It's recommended you set or target the Controller to closely match your engine's existing thermostat temperature. The Digital Controller will operate the engine's electric fan automatically once the engine has reached +3°C (+5.4°F) above the targeted / set temperature. Another significant benefit is that the Controller allows the EWP & Fan to run on in conjunction after engine shutdown for either 3 minutes or -10°C (-14°F) of set target temperature to eliminate heat soak.

Specification Metric Imperial & Other
Settable Temp Range 40 - 110 °C 104 - 230 °F
Fan Cut In Temp 3°C 5.4°F
Dimensions 98 x 95 x 25 mm 3.8 x 3.7 x 1"
Sensor Cable Length 3 m 10 ft
Voltage Range 12 - 29V DC
Max Current 12a
Temp Display Celsius or Fahrenheit
Warning Alarms High & low Temp, Above set temp, Sensor short circuit, Pump error, High & low voltage and Sensor open circuit
Sensor Type Thermistor in housing
Overrun / Shutdown -10°C (14°F) below set/target temperature or 3 minutes
Compatibility EWP80, EWP115, EWP130 & EWP150 Series Pumps
Warranty 24 Months
Manufacturer Part Number 8002

The updated LCD Digital Controller how has two specific functions. This unique Controller will now manage the operation of the EWP by varying the speed of the EWP in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures Singular degrees from 40°C (104°F) to 110°C (230°F).

Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine's electric fan automatically once the engine has reached +3c above the target temperature. A significant benefit too is the Controller allows the EWP to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.

Kit Contents
Quantity Description
1x EWP Digital Controller Assembly
1x Wiring Harness (inc 10a fuse)
1x Temp Sensor 1/4" NPT
1x Inline Adapter 35mm (38mm inc hose sleeves)
2x Hose Clamps
1x Ring Terminal
2x Rubber Hose Sleeves
2x Velcro Mounting Strips
1x Nylon Mounting Plate
1x Metal Mounting Bracket
1x Instruction Sheet
attention
ATTENTION
  • This digital controller is both 12 and 24v compatible.
  • Supplied with full installation instructions.
More Information
Manufacturer Davies Craig