Compact Air Conditioning Heater Unit 12v - Front Controls

Only 2 left

Availability: In stock

Excl. Tax: £333.33 Incl. Tax: £400.00

Product Description



Compact Combintation Heat & AC Unit with Front Mounted Controls 12v

The 3.5kw Lightweight Heater is our second smallest and lightest hot water based heater after the 2.2kw Micro Heater, sacrificing a little weight for performance this unit can be used as a more powerful defrost heater and can also provide more cabin heat.

The heater uses a specially designed copper & brass heater core offering excellent heat transfer capabilities for its size, this is accomplished using a high flow core design, high fin density and ultra-thin wall tube.

A lightweight axial fan is used to draw air through the heater core and expel it through 4x 51mm (2") outlet nozzles. The Axial fans are at minimum 50% lighter and use 25% of the power over traditional centrifugal blowers.

The 3.5kw Lightweight Heater is ideal for use in vehicles for defrosting windscreens, or as a backup heating device for vehicles if you already have a heated windscreen. If you have a large windscreen you can hook up all 4 outlets to feed the windscreen, or in medium sized vehicles you can utilise two outlets for defrost and two for dash or foot well vents.

Typical weight savings over a production vehicle heating system can be in excess of 6kg.

Specification Metric Imperial & Other
Heat Output 4.19 kw 14,300 BTU
Cooling Capacity 2.9 kw 9,900 BTU
Airflow 250 m3/hr 147 cfm
Weight 3.0 kg 6.6 lbs
Hose Size ∅ 16mm ∅ 5/8"
Air Nozzle Size 2x Open/Close Directional Nozzles
Noise Level 60 dB (Max Fan Speed)
Voltage 12v
Current Continuous 10.85a
Power Consumption 130w
Fan Speeds 3 Speed
Enclosure Construction ABS Plastic Enclosure
Heater Core Design Copper & Brass Core with Copper Fins
Part Number 002-E7E-AAD
Wiring Information

The fan has no onboard speed control, the simplest way to operate this fan is to use an ON/OFF toggle or rocker switch. If you would like to adjust the fan speed please see our PWM fan controller.

Wire Colour Use
Red Wire +12v
Black Wire Earth

Please ensure your supply is fused appropriately, it is recommended to use a 3a fuse and that your cable is rated higher than the fuse.

3.5kw Lightweight Heater Dimensions
  • Please note that a corrosion inhibitor such as glycol or anti-freeze should be used to prevent corrosion and prolong the useful life of all components used in the vehicles cooling system.
  • Not suitable for use in cooling systems that run at pressure higher than 2 bar (28 psi).

Additional Information

Additional Information

SKU F83-084-0F0

shop online with DealsPolo