AEM X-Series EGT Gauge 0 - 1000c

AEM X-Series EGT Gauge 0-1000c 30-0305

AEM’s 30-0305 X-Series 0-1800F/0-1000C Digital Exhaust Gas Temperature (EGT) gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want a highly accurate EGT readout in their high performance vehicle.

EASIER TO READ Visual improvements include a bright centre LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.

EASIER TO MOUNT Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.

SMARTER INTERFACE X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analogue outputs are also included for inputting into data loggers and engine management systems.

• 2-1/16" (52mm) gauge diameter for easy mounting in gauge pods
• Slim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!
• Programmable 3- or 4-digit center LED is 87% larger than original AEM gauges
• 24 green outer LEDs for quick reference to engine parameter
• Peak/Recall via gauge face buttons
• User selectable threshold warnings (excl. Volts)
• Optional silver bezel with white faceplate(s) accessory kits available (sold separately)
• AEMnet CANbus-enabled for transmitting data to EMS or Data Logger
• 0-5v analogue outputs for transmitting data to EMS or Data Logger
• Auto dimming sensor delivers ideal display brightness
• Positive locking connectors provide secure connection

Quantity	Part Number	Description
1x	10-0305	Instructions
1x	35-0305	Gauge Assembly
6x	35-4302	Red Insulated Butt Connectors
2x	35-8618	Knurled Nut M4x0.7
1x	35-8614	Mounting Bracket
1x	35-8617	Rubber Band
1x	35-3439	Cable - PWR/IO RTD
1x	35-2054	Temp Sensor
1x	35-2055	EGT Bung
1x	WM-2S	Wedge Lock 2 Pin Plug
2x	1062-20-0122	Size 20 Socket
1x	DTM06-2S	2 Pin Plug

To populate optional extras, use JST P/N: SPUD-001T-P0.5 terminals for 22-26 AWG wire.