Same Day Dispatch - Order Up To 3:30pm

5.5kw Cabin Heater - 24v

5.5kw Cabin Heater - 24v

6.1kw Cubby Heater - 24v

6.1kw Cubby Heater - 24v

5.5kw Cabin Heater - 12v

£120.00 £100.00
Availability: In stock

5.5kw Cabin Heater 12v

A great interior heater for use in Motorhomes, Caravans, Minibuses, Boats and other Marine applications, this unit can be hooked up to the vehicles cooling system to provide extra interior heating or installed into a bespoke central heating system for use with Eberspacher and Webasto water heaters. The Cabin Heater offers multi fan speed control giving maximum output or quiet running.

Specification Metric Imperial & Other
Heat Output 5.5 kw 18,750 BTU
Airflow 150 / 250 m3/hr 88.2 / 147 cfm
Weight 2.0 kg 4.4 lbs
Hose Size (Dimension X) ∅ 16mm ∅ 5/8"
Noise Level 48 dB (Max Fan Speed) -
Voltage 12v
Current Continuous / Startup 1.33a / 2.0a (Both Fans at Max Speed)
Power Consumption 16w
Fan Type Twin Axial Fans
Fan Speeds 2 Speed Per Fan
Enclosure Construction Nylon 6.6 / Plastic PA66 GF30
Heater Core Design Copper Tube with Aluminium Fin
Mounting Options Panel or Floor Mounted
Our Part Number 683-61F-933

This heater is primarily intended for panel fitment but can also be fixed horizontally using the 4 bolt holes on the bottom of the enclosure. For panel mounting you will need to cut a hole in your panel approximately 10mm smaller than the outside enclosure dimensions, the panel is the sandwiched between the grill fascia and the rear of the heater using the 6 screws supplied. This heater fits relatively flush leaving only ~10mm of the outlet grill protruding past the fixing panel.

If panel mounted please ensure that air can flow back into the internal volume, otherwise the heater will not work very well! We also stock various sizes of air grill.

Wiring Information

This heater uses two axial fans, each fan has a high and low speed setting, to operate at the desired fan speed you must apply power to either the orange or red wires, though not at the same time! Each fan has 3 wires giving 6 in total for the heater. It is recommended to use a 3 position Rocker or Rotary switch to operate the fans.

Please note that no switches are supplied with the heater, please see our range of multi position switches sold separately.

Wire Colour Use
2x Red +12v High Speed
2x Orange +12v Low Speed
2x Black Earth / Ground

Please ensure your supply is fused appropriately, it is recommended to use a 3a fuse and that your cable is rated higher than the fuse.

5.5kw Cabin Heater 12v
  • Please note that a corrosion inhibitor such as glycol or anti-freeze should be used to prevent corrosion and prolong the useful life of all components used in the vehicles cooling system.
More Information
Fan Speeds 2 Speed
Motor Type Brushed
Hose Size 16mm, 5/8"
Voltage 12v DC
Manufacturer Kalori